CleanBoost™ Engine Metal Treatment MettlePlus™ 12x8oz bottles case

CT-CBEMT-12x16oz

CleanBoost™ Engine Metal Treatment - MettlePlus™ EMT - Use at a ratio of 1:24 (8oz treats 6 quarts of oil)

Mettle Plus™ (Metal Treatment) using moly based technology can help with the reduction of ZDDP's in today's engine oils. Mettle Plus™ has stabilizing anti-oxidant's and very unique metal deactivators to assure that Mettle Plus™ performs well in engine applications and gear oils applications not changing the chemical make up of the oil. The oil acts like a delivery truck carrying the Mettle Plus ™ to the asperities of the metals and forming a covalent, galvanic bond to the metal allowing a 2 to 4 micron penetration into the metal, creating a smooth less friction and heat. Mettle Plus™ does not layer the metal or put a film over the top of the metal, it is designed to penetrates into the metal working with ferrous particulates within the oils environment, treating the metal, not the oil.

Oil analysis has proven that when adding Mettle Plus to your lubricants, reduce cylinder and bearing wear are achieved and component life can be extended 3 to 5 times longer. Reduced oxidation on the oil will also allow for longer engine and component life. 

APPLICATIONS:

• Gasoline or diesel engines
• Natural Gas Engine Applications (Cat 3500 and 3600 Series) 
• New or high mileage engines
• Truck, Marine, and Railroad engines, Construction, Off-Road, Motorcycle and Small Engines
• Compatible with petroleum or synthetic oils
• Differentials (Rear and Front End Axles)
• Manual Transmissions
• Gear Box Applications
• Milling Machines
• Anywhere where friction can create heat and stress
• Not Recommended with Automatic Transmissions or Wet Clutch Applications

Note:  Mettle Plus has been through a series of ASTM Tests to assure end users of the product can rest assure a quality product will be in their engines or gear box applications. 

D-130                    Copper Corrosion                                        1b                    1a               4d

D-92                      Flash Point, ºC/F                                       370/698            XXX             XXX

D-4172                  Four Ball-Wear, mm (w/mineral oil)             0.64                  XXX          XXX

D-5800                  Noack Volatility, wt. %                                  6.2                  XXX          XXX

D-97                      Pour Point, ºC                                           - 31                      XXX          XXX

D-2272                  Rotating Bomb Oxidation, minutes               15                     1                60

D-665                    Rust Prevention    (Pass or Fail)                 Pass                 Pass        Pass

D-445                    Viscosity, cSt @ 100 ºC                             8.07                  XXX          XXX

Ethyl                     Lead Corrosion, 2% solution, ppm                13                   10             30

Copper Corrosion, 10% solution, ppm                                      < 1                   1               20

D-4929-07               Chlorine % In Hydrocarbon Lubricant         0.00%            XXX          XXX

SAE-J2643      Effects on Vulcanized Rubbers  “Volume Change”       1.6%           1%              5%